Treatment and disposal technologies for health care waste

Items/Model

TS75

Picture

Principle

Solid Waste Incineration

Burn Rate

Average 75 kg/hour

Feed Capacity

Average 100kg

Control Mode

PLC(Programmable Logic Controller Incinerator)

Combustion Chamber

600L

Internal Dimensions

100x60x100cm

Secondary Chamber

300L

Smoke Filter Chamber

Yes

Feed Mode

Manual

Voltage

220V

Power

3.0Kw

Oil Consumption (L/Hour)

15-20

Natural Gas Consumption (m3n/hour)

**

Temperature Monitor

Digital Screen

Temperature Protection

Yes

Oil Tank

250L

Feed Door

Dia.55cm

Chimney

6 Meters

Chimney Type

Stainless Steel

1st.

800℃–1000℃

2nd.

Gross Weight

2500kg

External Dimensions

2080x1100x3840cm(without chimney)

HICLOVER Incinerator/Parts Range

Main Feature

Medical Waste Incinerators	HICLOVER 10-500kgs/Hr.Double Combustion Chambers
Single Combustion Chamber	Small, Cheap,10-20kgs/Hr.
Three Combustion Chambers(Optional)	3 Chambers for high risk waste
Pet Cremation Equipment	For Pet(small/big) Cremation Business
Animal Incineration Equipment	For other animal incineration
	Items/Model

The forecasted feedstock loads, and daily loading rates are generally summarized as:

• Mixed general, clinical and incinerable hazardous wastes with a wide range of calorific values and densities. The wastes will consist of 100% biomedical wastes.

• Wastes either small enough to fit within a 60 litre waste sack or broken up or shredded to less than 300mm in size.

• Operation on a daytime shift basis, 5 days per week.

TS100(PLC)

TS150(PLC)	TS300(PLC)	TS500(PLC)	Burn Rate (Average)	100 kg/hour
150 kg/hour	300 kg/hour	500 kg/hour	Control Mode	PLC Auto.
PLC Auto.	PLC Auto.	PLC Auto.	Combustion Chamber	1200L
1500L	2000L	3000L	Internal Dimensions	120x100x100cm
150x100x100cm	170x120x100cm	210x120x120cm	Secondary Chamber	600L
750L	1000L	1500L	Smoke Filter Chamber	Dry Scrubber
Dry Scrubber	Dry Scrubber	Dry Scrubber	Feed Mode	Manual
Manual	Manual	Manual	Voltage	220V
220V	220V	220V	Power	1.38Kw
1.69Kw	2.57Kw	4.88Kw	Diesel Oil Consumption (kg/hour)	Ave.20.4
Ave.24.2	Ave.33	Ave.44	Natural Gas Consumption (m3n/hour)	Ave.24.5
Ave.29	Ave.39.6	Ave.52.8	Temperature Monitor	Yes
Yes	Yes	Yes	Temperature Protection	Yes
Yes	Yes	Yes	Oil Tank	200L
300L	500L	500L	Chimney	10Meter
10Meter	14Meter	14Meter	Chimney Type	Stainless Steel
Stainless Steel	Stainless Steel	Stainless Steel	1st. Chamber Temperature	800℃–1000℃
800℃–1000℃	800℃–1000℃	800℃–1000℃	2nd. Chamber Temperature	1000℃-1200℃
1000℃-1200℃	1000℃-1200℃	1000℃-1200℃	Residency Time	2.0 Sec.
2.0 Sec.	2.0 Sec.	2.0 Sec.	Gross Weight	6000kg
8500kg	11000kg	16000kg	External Dimensions	260x150x180cm
300x160x190cm	400x210x300cm	450x210x300cm

The proposed incinerators shall be able to be completely packed into a series of 20ft export standard sea containers.

“Warranty will be as per the UNOPS ‘contracts for the provision of goods’ under section 4.5 of the ‘general conditions of contract’ 4.5 WARRANTIES: Unless otherwise specified in the Contract, in addition to and without limiting any other warranties, remedies or rights of UNOPS stated in or arising under the Contract, the Contractor warrants and represents that:

4.5.1 The goods, including all packaging and packing thereof, conform to the specifications of the Contract, are fit for the purposes for which such goods are ordinarily used and for any purposes expressly made known in writing in the Contract, and shall be of even quality, free from faults and defects in design, material, manufacturer and workmanship;

4.5.2 If the Contractor is not the original manufacturer of the goods, the Contractor shall provide UNOPS with the benefit of all manufacturers’ warranties in addition to any other warranties required to be provided under the Contract;

4.5.3 The goods are of the quality, quantity and description required by the Contract, including when subjected to conditions prevailing in the place of final destination;

The goods are free from any right of claim by any third-party, including claims of infringement of any 4.5.4intellectual property rights, including, but not limited to, patents, copyright and trade secrets;

4.5.5 The goods are new and unused;

4.5.6 All warranties will remain fully valid following any delivery of the goods and for a period of not less than one (1) year following acceptance of the goods by UNOPS in accordance with the Contract;

4.5.7 During any period in which the Contractor’s warranties are effective, upon notice by UNOPS that the goods do not conform to the requirements of the Contract, the Contractor shall promptly and at its own expense correct such non-conformities or, in case of its inability to do so, replace the defective goods with goods of the same or better quality or, at its own cost, remove the defective goods and fully reimburse UNOPS for the purchase price paid for the defective goods; and,

4.5.8 The Contractor shall remain responsive to the needs of UNOPS for any services that may be required in connection with any of the Contractor’s warranties under the Contract.