Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Gal annealed) by Hot-Dip Process FM GLOBAL (FM)
SECTION 11 82 21 Page 6
High-Strength Low-Alloy and High-Strength Low-Alloy with Improved Formability, Solution Hardened, and Bake Hardened
The incinerator will be of the controlled atmosphere kind, designed for (6-8) hour-day surgeries and rated at 75 mph.
MEDICAL WASTE INCINERATORS for furnishing, installing, adjusting, and testing automatically controlled air medical waste incinerators having a capability to burn 75 Kg/hour waste substances of biological and pathological nature.
The process of incineration provides the advantage of volume reduction as well as the ability to dispose of familiar waste and sharps. On site incinerators provide a quick and effortless way of disposing medical waste. This is the most commonly accepted and feasible way of managing highly infectious waste.
9Platform and portholes created to USEPA standards to ease stack testing.
The publications listed below form a part of this specification to the extent referenced. The publications are referred to within the text by the basic designation only.
AMERICAN WELDING SOCIETY (AWS)
3Continuous loading with hydraulic ram feeder o Burners and fuel system
MANUFACTURERS STANDARDIZATION SOCIETY OF THE VALVE AND FITTINGS INDUSTRY (MSS)
8Incinerator building, including fire safety equipment
ASTM A53/A53M (2010) Standard Specification for Pipe,
NATIONAL ELECTRICAL MANUFACTURERS ASSOCIATION (NEMA) NATIONAL FIRE PROTECTION ASSOCIATION (NFPA)
U.S. GENERAL SERVICES ADMINISTRATION (GSA) UNDERWRITERS LABORATORIES (UL)