Main unit
Ambient temperature 10 0C to 40 0C
Capable of tracking all incinerator parameters With large LCD or similar for display of all progress
EU waste incinerator Directive- EC 76/2000
Gratings Provided
Gas residue or retention Period > 2 second at minimum 850 0C
Ability to service equipment Manufacturer/Agent shall have adequate facilities, spare parts, qualified and skilled technical staff to offer comprehensive care service and spare parts sales for the life span of the incinerator
Distribution Board Supply and install distribution board. 100 A, complete with MCBs suitable for the score of the incinerator unit and associated equipment. Wiring to be performed according IEE regulations.
Maintenance training On-site maintenance training on Preventive Maintenance, repair and trouble shooting
Waste cart, stainless steel 1 piece
KEMSA For review and verification
equal and approved equivalent
World Bank Emission Standards
4 Physical characteristics
Power Requirements 240V,A/C 50Hz, single phase, with PE
Testing and Commissioning of the machine to the satisfaction of this user
Pre installation works
Type Two combustion chambers type; primary and Secondary, controlled/forced combustion air form with a flue gas emission scrubbing unit
Provide fuel and test run the incinerator for 3 hours each day for 7 days
Temperature Maximum 1600 0C
5 Operating environment
User training onsite user training on operation and daily up keep
Comprehensive preventive & repair service Provided a 12 months comprehensive preventive and repair service contract inclusive of spare parts and material from date of commissioning
Related Stories
March 20, 2023
March 19, 2023
March 19, 2023