Parameter |
Compliance |
Type of Waste |
To treat medical waste, categories A,B,C,D,E |
Type of Incinerator |
Pyrolytic |
Nominal Burn rate |
50 t0 60 kg/ hr at 3500Kcal/Kg |
Loading |
Manual, Batch Load |
De Ashing |
Automatic or Manual batch de ashing |
The incinerator must avoid the release of black smoke and fine dust during the loading |
Primary chamber capacity |
2-3 m³ |
The insulation of the combustion chamber should be composed of refractory bricks, having a higher content of aluminium and insulates, |
The plate of combustion in carborundum avoiding the fixing of glass and slags |
Hours of operation /Day |
>10 hrs |
Max Operating Temperatures |
1400 °C |
Normal Operating Temperatures(Primary) |
>850 °C |
Operating Temperature(Secondary) |
>1100 °C |
It should have digital temperatures regulator( Temperatures regulator in digital watch) |
Carbon content of ashes |
<2% |
The installation should be completely free from visible smoke as well as offensive odours |
Residence time in second chamber |
2 second minimum |
The internal diameter of the Chimney |
:Ø 400 |
Height of stack |
>8m |
Burner operation |
Automatic On/Off |
Fuel |
Diesel |
Fuel consumption at raed capacity |
>7kg waste /ltr |
Electricity consumption |
<2kW at rated capacity |
Operating Voltage |
220 – 240V AC 50Hz |
Spare parts |
Supply for 1 year quoted as option |
Consumables |
Supply for 1 year of operation to be mentioned as option |
Warranty |
Parts and service support: 1 year minimum post comissioning |
Service support |
<72 hours |
Emission standard Compliance |
BS3316 or equivqlent standard |
Process filtering system |
Scruber to be mentioned as option |
CE Manufacturing Compliance |
BS EN 746-2-1997 |
Design Specification |
Type A,B,C,D,and E of medical waste |
Installation and Comissioning |
Included in condition of supply |
Training in preventive and curative maintenance and use of the incinerator |
Operator training inclusive in offer |
Capacity to treat Plastic |
Not less than 40% by weight |